| Resumenes Vol. 38 No.4 de 2006 |
|
|
DETERMINACIÓN EXPERIMENTAL DE LA DIFUSIVIDAD TÉRMICA EN POLVOS DE ARCILLA USANDO TÉCNICA FOTOACÚSTICA |
G. Peña-Rodríguez, J. Dulcé Moreno, M. Corzo Paredes , N. Peñaranda Tozcano y A. Calderón. |
Se reporta por primera vez experimentalmente la difusividad térmica a temperatura ambiente en muestras de polvos de arcillas rojas de la región de los Vados, Norte de Santander. Las medidas fueron realizadas empleando la técnica fotoacústica en configuración de transmisión de calor [1]. Dichas arcillas, que son utilizadas como materia prima en la industria cerámica y de la construcción, están compuestas principalmente el O, Si, Al, Fe y K [2]. Se encontró que no existe variación significativa en los resultados obtenidos, para este parámetro termofísico, en muestras con tamaño de grano en rango de 58 a 75 m m, sometidas a tiempos de cocción de 30, 60, 90, 120 y 150 minutos a temperatura constante de 900 ºC . La distribución de tamaño de grano se realizó usando la norma ASTM D2772-90. Los valores presentados en este trabajo son del mismo orden de magnitud de los reportados para materiales de construcción como el ladrillo común y la teja, así como para compuestos tales como SiO 2 , Fe 2 O 3 y Fe 2 SiO 4 , los cuales son sus principales constituyentes .
Palabras claves:: Propiedades térmicas, difusividad térmica, instrumentación y técnicas térmicas (espectroscopía Fotoacústica). |
The thermal diffusivity at room temperature is reported for the first time of red clay powders samples of the north oriental region of Colombia (Vados – Cúcuta- Norte de Santander). Measurements were performed using the photoacoustic technique in a heat transmission configuration [1]. These clays , are widely used in the fabrication of different kinds of building materials and ceramics factories; its composition is mainly O, Si, Al, Fe and K [2]. One was that it does not exist significant variation in the results found for this thermophysical parameter, in samples with grain sizes in rank from 58 to 75 m m, for annealing time of 30, 60, 90, 120 and 150 minutes to constant temperature of 900 ºC . The grain sizes distribution of the samples were obtained following the ASTM (American Standard test Method) D2772-90. The results presented in this work is of the same order of magnitude of the reported for building materials with bricks and roof tiles, as well as for composed like SiO 2 , FeO 3 and Fe 2 SiO 4 , which are their main components.
|
| keywords:
(PACS) 91.60. Ki; 66.30. Xj; 07.20. –n; 81.70. Cv |
|
|